JL AUDIO 12W1V3-4 žemų dažnių garsiakalbis

Kaina:
299,00 €
Su mokesčiais Dėl pristatymo laiko teirautis

Automobilinis žemų dažnių garsiakalbis.

Dydis: 12" (30cm)

Galingumas: 300W RMS

Varža: 4 ohm

Kiekis
Pristatymas pagal užsakymą

Pateikti pasiūlymą

Jūsų pasiūlymas išsiųstas

Jūsų pasiūlymas priimtis, prašome patikrinti savo el. pašto dėžutę

  • Use dot instead of comma
  •     *Būtini laukeliai

Kraunama

Table_Image
Continuous Power Handling (RMS) 300 W
Recommended Amplifier Power (RMS) 75 - 300 W
Nominal Impedance (Znom) 4 Ω

Physical Specifications

Nominal Diameter 12.0 in / 300 mm
Overall Diameter (A) 12.5 in / 318 mm
Mounting Hole Diameter (B) 11.0625 in / 281 mm
Bolt Hole Circle Diameter (C) 11.7 in / 297 mm
Motor Outer Diameter (D) 5.25 in / 133 mm
Mounting Depth (E) 5.41 in / 137 mm
Driver Displacement 0.052 cu ft / 1.47 L
Net Weight 12.2 lb / 5.5 kg

Parameters

Free Air Resonance (Fs) 26.21 Hz
Electrical “Q” (Qes) 0.535
Mechanical “Q” (Qms) 8.2
Total Speaker “Q” (Qts) 0.502
Equivalent Compliance (Vas) 2.706 cu ft / 76.63 L
One-Way Linear Excursion (Xmax)* 0.45 in / 11 mm
Reference Efficiency (no) 0.25%
Efficiency (1 W / 1 m)** 86.1 dB SPL
Effective Piston Area (Sd) 81.426 sq in / 0.0525 sq m
DC Resistance (Re) 3.915 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Sealed Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 1.10 cu ft / 31.5 L
External Width (W) 16 in / 406 mm
External Height (H) 16 in / 406 mm
External Depth (D) 11 in / 279 mm
F3 39.63 Hz
Fc 48.75 Hz
Qtc 0.9338

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
* All specifications are subject to change without notice.

Ported Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 1.6 cu ft / 45.3 L
External Width (W) 25 in / 635 mm
External Height (H) 15.5 in / 394 mm
External Depth (D) 13 in / 330 mm
Internal Slot Port Width (SW) 1.5 in / 38 mm
Internal Slot Port Height (SH) 14 in / 356 mm
Internal Slot Port Length (SL) 30.75 in / 781 mm
Port Extension Length (EL) 17 in / 432 mm
Tuning Frequency (Fb) 31.79 Hz
F3 31.41 Hz
12W1v3-4